Search found 92 matches
- Fri Dec 06, 2024 8:07 am
- Forum: SolidWorks FAQ
- Topic: CtrlRButton-Enter2 Utility: Remap Ctrl+RMB to send an Enter instead
- Replies: 0
- Views: 299
CtrlRButton-Enter2 Utility: Remap Ctrl+RMB to send an Enter instead
A normal Ctrl+Right Mouse Button is the same as a plain RMB. Since this is duplicate functionality, CtrlRButton-Enter2 remaps a Ctrl+RMB to send an Enter instead. Instead of moving to click a green check, by whichever method you use, with this utility, you can instead hold down the CTRL key and clic...
- Thu Dec 05, 2024 8:36 am
- Forum: SolidWorks FAQ
- Topic: DublTapESC utility: Double tap ESC to send an ESC (single press does nothing)
- Replies: 1
- Views: 208
DublTapESC utility: Double tap ESC to send an ESC (single press does nothing)
UPDATED: 06-DEC-2024 Intercepts a single ESC keypress to prevent an inadvertent ESC, such as when building an exploded view. Instead, a double tap press of ESC is required to send a single ESC press. This utility is easily converted for other keys, such as for F1 to prevent an unwanted Help starting...
- Tue Mar 14, 2023 8:51 pm
- Forum: Rendering - Visualize - Photoview
- Topic: Reverse Mouse Wheel for Visualize (or others w/o setting)
- Replies: 0
- Views: 2061
Reverse Mouse Wheel for Visualize (or others w/o setting)
This non-reversible mouse wheel issue came up a while back on the old SolidWorks forum. Then, Visualize didn't have a setting for this, so I wrote a little utility to do this wheel reversal. In the zip are three files: "Reverse Mouse Wheel V3.exe", "Reverse Mouse Wheel V3.txt", &...
- Tue Oct 04, 2022 12:47 pm
- Forum: SolidWorks FAQ
- Topic: HoverSloMo utility: slow cursor speed by pressing Ctrl & Alt
- Replies: 0
- Views: 1753
HoverSloMo utility: slow cursor speed by pressing Ctrl & Alt
Windows mouse speed is from 1 to 20 (continuous), but to change it, you must open the mouse settings, so dynamic speed adjustment isn't possible. The attached utility slows your mouse cursor speed, as a percentage of your normal speed, when the Ctrl and Alt keys are pressed. Release these keys and y...
- Wed May 04, 2022 12:42 pm
- Forum: How To Questions
- Topic: Tab & Slot in Multiple parts
- Replies: 8
- Views: 6636
Re: Tab & Slot in Multiple parts
If you don't mind breaking away the original parts, you can also use Make Independent on the tabbed/slotted instances.
- Wed May 04, 2022 12:40 pm
- Forum: How To Questions
- Topic: Tab & Slot in Multiple parts
- Replies: 8
- Views: 6636
Re: Tab & Slot in Multiple parts
What about just adding the tabs & slots and then add a tabbed/slotted configuration to both affected parts and the default config without tabs/slots.
Then select the configs according in the assembly.
Then select the configs according in the assembly.
- Mon Feb 07, 2022 3:01 pm
- Forum: SolidWorks FAQ
- Topic: Why can't I move the first component inserted in my Assembly?
- Replies: 15
- Views: 8783
Re: Why can't I move the first component inserted in my Assembly?
I owe you an apology. I didn't read your post as closely as I should have. I thought you were referring to the new feature that puts a column for selecting to Fix or Float components on the simplified design table you get when you right-click on the component and choose "Configure Component&qu...
- Mon Feb 07, 2022 12:36 pm
- Forum: SolidWorks FAQ
- Topic: Why can't I move the first component inserted in my Assembly?
- Replies: 15
- Views: 8783
Re: Why can't I move the first component inserted in my Assembly?
I don't know when this capability was first added, by my screen shots are from SW2019 (I'm not on 2022 yet, just 19, 20, 21):Glenn Schroeder wrote: ↑Mon Feb 07, 2022 10:43 am Thank you for posting. That feature is new to SW2022, so wasn't available when I wrote the above post.
- Mon Feb 07, 2022 9:43 am
- Forum: SolidWorks FAQ
- Topic: Why can't I move the first component inserted in my Assembly?
- Replies: 15
- Views: 8783
Re: Why can't I move the first component inserted in my Assembly?
As an FYI extension to the OP, if the parent assembly has two or more configurations, then the Float menu will have a sub-menu from which you are to select which configuration(s) to apply the float command: to all configurations; to only the current configuration or to one or more specific configura...
- Tue Feb 01, 2022 8:08 am
- Forum: How To Questions
- Topic: Concentric mate vs coincident axes
- Replies: 10
- Views: 3203
Re: Concentric mate vs coincident axes
Is there a reason to prefer concentric mate over coincident axes? It seems as if they both make the intention clear. Is one faster to resolve in an assembly? One issue is that lock rotation is only available in a concentric mate. Don't need to turn on temp axes (and be awash in blue) for a concentr...
- Tue Feb 01, 2022 7:55 am
- Forum: How To Questions
- Topic: Concentric mate vs coincident axes
- Replies: 10
- Views: 3203
Re: Concentric mate vs coincident axes
I can't attest to "all", but I will agree with you for tangent planes (then coincident to this plane).
Never the flip-flop you see when mating directly with the regular tangent mate.
- Wed Jan 26, 2022 8:06 am
- Forum: How To Questions
- Topic: Opening a Subassembly in a separate sindow
- Replies: 22
- Views: 4430
Re: Opening a Subassembly in a separate sindow
In addition to selecting an assembly in the tree, you can also select an assembly by right clicking one of its components and selecting "Select Subassembly".
If it's part of a nested assembly, the you can select the immediate parent and a generation above that.
- Wed Jan 26, 2022 8:00 am
- Forum: How To Questions
- Topic: Opening a Subassembly in a separate sindow
- Replies: 22
- Views: 4430
Re: Opening a Subassembly in a separate sindow
How embarrassing; I have a typo in the topic title, sorry about that :) Once again you guys helped me find a solution; or understand what I was trying to do better. I could not take a screen shot because I am working on a laptop, I don't have the "PRT-SCREEN" key, neither does Snipping To...
- Mon Jan 24, 2022 12:20 pm
- Forum: SolidWorks FAQ
- Topic: How to dimension to the intersection of two edges (chamfer, fillet, etc)
- Replies: 1
- Views: 7019
Re: How to dimension to the intersection of two edges (chamfer, fillet, etc)
As a reminder, could please add to this FAQ, that there is also a dedicated chamfer dimension (displays D X Angle only though).
- Fri Jan 07, 2022 7:51 am
- Forum: How To Questions
- Topic: part flipping 180 degrees when coincident mating
- Replies: 9
- Views: 2211
Re: part flipping 180 degrees when coincident mating
A point coincident to a spline (or anything else) is a gimble (gimbal?) situation.
All sorts of pivoting about the point and translation along the spline can occur without violating the mate.
Perhaps another mate or mate entities selection, as others have mentioned, may be required.
All sorts of pivoting about the point and translation along the spline can occur without violating the mate.
Perhaps another mate or mate entities selection, as others have mentioned, may be required.
- Tue Dec 28, 2021 1:45 pm
- Forum: How To Questions
- Topic: Possible to change middle mouse button command?
- Replies: 3
- Views: 5371
Re: Possible to change middle mouse button command?
I don't believe it is with the "standard" mouse. Specialized devices usually have customizable software included. Barring getting a more sophisticated device, you could also try writing a few Autohotkey scripts. (https://www.autohotkey.com/) Fairly simple to write low end key remapping scr...
- Mon Dec 20, 2021 8:20 am
- Forum: SW General
- Topic: Initial Thoughts on SW2022
- Replies: 34
- Views: 8000
Re: Initial Thoughts on SW2022
For your IT folks: The license server must be upgraded every time a new release comes out. As far as the server is concerned, it's a "future version", so the license manager must be upgraded to the latest version of SW that you're running. To do this, the new manager must be installed, the...
- Mon Dec 13, 2021 1:00 pm
- Forum: SW General
- Topic: Top-Ten List success
- Replies: 153
- Views: 32980
- Fri Dec 10, 2021 8:26 am
- Forum: How To Questions
- Topic: How to create section views
- Replies: 25
- Views: 5803
Re: How to create section views
No, I cannot @Dwight , using SWx 2018 SP5. Is this newer? I preferred this method among others on this page because the assembly environment is far faster and responsive than the slow drawing environment. I assumed this would work as suggested. And made a handful of saved views (XX SevtionView1, XX...
- Fri Dec 10, 2021 8:02 am
- Forum: How To Questions
- Topic: How to create section views
- Replies: 25
- Views: 5803
Re: How to create section views
Tom You are right. I had thought I'd seen that done in a presentation, and I have occasionally used saved section views, but I never did use one in a drawing. I see now that help does say that you can't use them in drawings. Sorry for the misstatement. Dwight I don't know where in Help it states th...
- Mon Dec 06, 2021 12:49 pm
- Forum: How To Questions
- Topic: How to create section views
- Replies: 25
- Views: 5803
Re: How to create section views
Thank you, I missed that, but I do recall having done that.Glenn Schroeder wrote: ↑Mon Dec 06, 2021 12:40 pm . . . or enter -90. That will do the same thing (I mentioned above that you can enter negative values).
- Mon Dec 06, 2021 12:48 pm
- Forum: How To Questions
- Topic: How to create section views
- Replies: 25
- Views: 5803
Re: How to create section views
This answers the last question in your OP.mike miller wrote: ↑Fri Dec 03, 2021 2:06 pm You can also do a Broken-out Section view if you want only a small area sectioned. This is defined by a contour and a cut depth.
2021-12-03 14_04_22.jpg
- Mon Dec 06, 2021 12:37 pm
- Forum: How To Questions
- Topic: How to create section views
- Replies: 25
- Views: 5803
Re: How to create section views
Also, when you move child views to a different sheet, be sure to add a location label. You can also use them on the same sheet if needed. These are dynamic and will update with the current position and sheet. image.png Click each parent and child. For a crop, you must click the profile. image.png Af...
- Mon Dec 06, 2021 12:25 pm
- Forum: How To Questions
- Topic: How to create section views
- Replies: 25
- Views: 5803
Re: How to create section views
is there any way to rotate a view? You know, make it upright, instead of at the angle that the auxiliary view plane places it? In addition to Mr. Schroeder's reply (and, yes, Rotate View in the HUD is OOTB), you can also right click a view and select: image.png This dialog appears (same as in Mr. S...
- Mon Dec 06, 2021 12:14 pm
- Forum: How To Questions
- Topic: How to create section views
- Replies: 25
- Views: 5803
- Thu Dec 02, 2021 7:38 am
- Forum: How To Questions
- Topic: How to make a library Part always excluded from BOM?
- Replies: 6
- Views: 1717
Re: How to make a library Part always excluded from BOM?
Can it be made into an envelope?
Aren't envelopes excluded from BOMs?
Aren't envelopes excluded from BOMs?
- Wed Dec 01, 2021 12:32 pm
- Forum: SW General
- Topic: Weldment profile sorting all wrong!!!
- Replies: 2
- Views: 689
Re: Weldment profile sorting all wrong!!!
What you're looking for is called numerical sorting. Which sorting method happens in a File Explorer window? Is it like your OP image? Perhaps Windows sorting got change somehow. Windows is numerical by default, I believe and it's a reg edit to change it. https://www.tenforums.com/tutorials/91417-en...
- Wed Dec 01, 2021 8:37 am
- Forum: How To Questions
- Topic: How to pattern items in a Mirror Part
- Replies: 6
- Views: 1710
Re: How to pattern items in a Mirror Part
I can replicate your issue.
Despite saying HW data is included, the pattern can't be used: I added this issue to the Swamp's TTL.
https://r1132100503382-eu1-3dswym.3dexp ... tSO9nNRoAw
Despite saying HW data is included, the pattern can't be used: I added this issue to the Swamp's TTL.
https://r1132100503382-eu1-3dswym.3dexp ... tSO9nNRoAw
- Mon Nov 29, 2021 2:25 pm
- Forum: SW General
- Topic: Dimension with Filled/Mask Background?
- Replies: 5
- Views: 4480
Re: Dimension with Filled/Mask Background?
I don't believe you can, like it's done in AutoCAD.
I tried adding a solid hatch as a substitute for Shaded with Edges, but halos are only for non-solid hatches.
I tried adding a solid hatch as a substitute for Shaded with Edges, but halos are only for non-solid hatches.
- Mon Nov 29, 2021 2:14 pm
- Forum: SW General
- Topic: Solidworks 2022 SP0 is out
- Replies: 7
- Views: 1816
Re: Solidworks 2022 SP0 is out
But...SolidWorks is world-class, 3.1D CAD technology!mike miller wrote: ↑Mon Nov 29, 2021 8:03 am Can I say................I'll wait for SP0.1....??? I'm sorry, my faith in DSS is at a really low ebb.
- Tue Nov 23, 2021 12:28 pm
- Forum: How To Questions
- Topic: How to show pattern dimensions
- Replies: 9
- Views: 1342
Re: How to show pattern dimensions
What does this mean? Where do I create this dim? Create it within your sketch that has the pattern. Mark it as driven. image.png You can also reference this dim into a global variable which is then linked to a custom property: image.png This property is then linked to a note on the drawing: image.p...
- Mon Nov 22, 2021 8:51 pm
- Forum: How To Questions
- Topic: How to show pattern dimensions
- Replies: 9
- Views: 1342
Re: How to show pattern dimensions
Yes, you can draw 2 sketch lines in the drawing view. Relate each line to sprocket center and the other ends to the same place on two adjacent teeth. Dimension between these to lines, adding in parentheses if it's a reference. How you tried adding a driven angular dim in your part and importing this...
- Mon Nov 22, 2021 5:14 pm
- Forum: SW General
- Topic: Top-Ten List success
- Replies: 153
- Views: 32980
Re: Top-Ten List success
The title does say TTL Swamp World 2022, so no surprise.mike miller wrote: ↑Mon Nov 22, 2021 9:16 am 2021-11-22 09_11_23.jpg
1) I thought the TTL was only for SWX. Adding other software just dilutes it. On second thought, maybe that's intentional.
- Sun Nov 21, 2021 4:09 pm
- Forum: SW General
- Topic: Top-Ten List success
- Replies: 153
- Views: 32980
Re: Top-Ten List success
Attached for reference are the 2020 TTL submissions in case you wish to repost previous TTL ideas. The zip file contains the Swamp's HTML page that I saved at the end. In the zip are "3DSwym SOLIDWORKS Top Ten 3DExperience World 2020.html" and its linked folder of the same name. This folde...
- Fri Nov 19, 2021 12:48 pm
- Forum: SW General
- Topic: Rough Shape
- Replies: 5
- Views: 949
Re: Rough Shape
I added operations so that the original block runs to the end, eliminating the land I showed in my previous post. I reorder the fillets and made the long edges as VarFillets computed at half the end widths in the sketch picture sketch (I had to add these dimensions). Then I did each end, increase th...
- Fri Nov 19, 2021 12:20 pm
- Forum: SW General
- Topic: Rough Shape
- Replies: 5
- Views: 949
Re: Rough Shape
The two cuts don't go to the wide end, so 2 narrow flats are created, which impacts the fillets.
- Wed Nov 17, 2021 1:09 pm
- Forum: SolidWorks FAQ
- Topic: FindLostDialog utility (locate a lost dialog)
- Replies: 0
- Views: 1905
FindLostDialog utility (locate a lost dialog)
A SolidWorks dialog can sometime get put (or sent) into a non-visible portion of the screen. Attached is a utility (zipped), "FindLostDialog.exe", which attempts to find a lost dialog, given the dialog's title, and then try to move it to the upper left corner of your monitor so it is visib...
- Wed Nov 17, 2021 8:07 am
- Forum: SW General
- Topic: Solidworks 2021 SP 5.1 is now available (Seems to be working about as good as Solidworks usually works)
- Replies: 37
- Views: 13340
Re: Solidworks 2021 SP 5.0 is now available (DONT GET IT !!! )
I understand that is a daunting task. But other software companies do a significantly better job than the solidworks team. It starts at the top level with a philosophy. Success: Don't add a new feature until it is robust. Failure: Throw the new feature in as soon as the GUI is written. We'll worry ...
- Wed Nov 17, 2021 7:53 am
- Forum: SW General
- Topic: Save BOM as Excel Issue.
- Replies: 10
- Views: 3402
Re: Save BOM as Excel Issue.
Odd.. It seems this is likely the issue, even if I cannot fathom how/why.. But mission accomplished. And although I still do not have any clue why solidworks and Excel will not save xlsx files to my preferred folder, I have an acceptable workaround. Thank you to you who offered assistance. I apprec...
- Tue Nov 16, 2021 2:30 pm
- Forum: SW General
- Topic: Some Sheet Metal Features are Grayed out!!
- Replies: 12
- Views: 5167
Re: Some Sheet Metal Features are Grayed out!!
I am working on this file and I want to do a closed corner but the Closed Corner feature is grayed out along with some of the other sheet metal features. grumph grumph o[ o[ o[ 2021-11-11 15_36_57-Window.jpg How am I supposed to do a closed corner? What causes this???????????!!!!!! We have had some...
- Mon Nov 15, 2021 12:40 pm
- Forum: Surfacing
- Topic: Four Tube Joint
- Replies: 18
- Views: 5345
Re: Four Tube Joint
Although it's only 2 pipe & 3 pipe examples, there's a how-to lesson at MySolidWorks>Training:
https://my.solidworks.com/training/mast ... lex-blends
https://my.solidworks.com/training/mast ... lex-blends
- Mon Nov 15, 2021 12:27 pm
- Forum: How To Questions
- Topic: How to mate center point of circle of imported body to a plane in the Body-Move/Copy feature
- Replies: 13
- Views: 4063
- Mon Nov 15, 2021 12:19 pm
- Forum: How To Questions
- Topic: can't select other
- Replies: 18
- Views: 2690
Re: can't select other
Can you post some screen shots of your issue.
Also, look into Pattern Driven Component Pattern.
Also, look into Pattern Driven Component Pattern.
- Mon Nov 15, 2021 8:07 am
- Forum: Catia and 3DX
- Topic: Does anyone actually use 3DExperience in a productive manner?
- Replies: 1291
- Views: 578633
Re: Does anyone actually use 3DExperience? Still waiting.......
Yep! Check this out. https://r1132100503382-eu1-3dswym.3dexperience.3ds.com/#community:yUw32GbYTEqKdgY7-jbZPg/idea:FaNmdCMaTPGvPvIA4ITpcw I participate in their forum user "focus group". My meeting moniker is Dennis: BAD COP! I don't love busting their chops, but they make it so easy! So ...
- Fri Nov 12, 2021 1:55 pm
- Forum: How To Questions
- Topic: How to set default gauge table in new parts?
- Replies: 8
- Views: 2139
Re: How to set default gauge table in new parts?
Depending on your SW version, you can also set the gauge table per material. Unfortunately, it must be a custom material, which adds another layer of maintenance in a shared environment. Check Guage Table and select it from the dropdown: image.png You must also check "Use material sheet metal p...
- Fri Nov 12, 2021 8:25 am
- Forum: How To Questions
- Topic: How to refresh the gauge table - is it possible?
- Replies: 9
- Views: 2413
Re: How to refresh the gauge table - is it possible?
You can reload your table by selecting another and then reselecting the original table without leaving the Sheet Metal PM. Select another gauge table (if available, it doesn't matter which). Click Yes to this dialog: image.png The newly selected table is loaded and the current table is removed. Whil...
- Fri Nov 12, 2021 8:09 am
- Forum: How To Questions
- Topic: How to fill in a notch in the bend area of flange?
- Replies: 5
- Views: 1204
Re: How to fill in a notch in the bend area of flange?
If you only need material at the bend, your cut sketch can be colinear to the form line and SW will refold.
But material is needed outboard of the form lines to make a good bend, so this model won't make for a practical part.
But material is needed outboard of the form lines to make a good bend, so this model won't make for a practical part.
- Fri Nov 12, 2021 8:01 am
- Forum: How To Questions
- Topic: How to fix instance count format for PEM holes
- Replies: 2
- Views: 802
Re: How to fix instance count format for PEM holes
Hello,
I can't replicate your issue (SW2019), but perhaps it has something to do with "Count delimiter" in doc properties.
If this is set to "Use hole standard" then perhaps the two hole types are different.
Just a guess.
I can't replicate your issue (SW2019), but perhaps it has something to do with "Count delimiter" in doc properties.
If this is set to "Use hole standard" then perhaps the two hole types are different.
Just a guess.
- Thu Nov 11, 2021 1:31 pm
- Forum: How To Questions
- Topic: Define Assembly Axis coincident with Center Of Mass
- Replies: 16
- Views: 3422
Re: Define Assembly Axis coincident with Center Of Mass
Another way is to create massless part that you can mate to the cg. Then you can mate to that object. It seems to follow the cg accurately on rebuild. Capture.PNG Along the lines of colt's post, if you use a surface instead of a solid body, then you needn't worry about any effects the CG ball has o...
- Thu Oct 28, 2021 7:54 am
- Forum: SW General
- Topic: hide planes & sketch in assembly
- Replies: 21
- Views: 5487
Re: hide planes & sketch in assembly
Along the lines of Mr. Schroeder's suggestion on using display states. If you use configurations in conjunction with display states, then the visibility of planes can be controlled. You must create a configuration in each child file that you need to maintain planes. Right-click a display state name ...