CAD Forum

Ömür Tokman

gupta9665 wrote: ↑Tue Nov 26, 2024 12:09 pm Make sure you are using version 2 of this macro.

Wow I didn't know there was a second version. I don't know the difference between the two. If you have the second version, can you share it?

Ömür Tokman

Maybe a little late reply but it is a very useful macro, I recommend it.

BlankDatums.swp: (127.5 KiB) Downloaded 76 times

Ömür Tokman

tiwari1211@gmail.com wrote: ↑Sat Sep 28, 2024 4:08 pm Hello Everyone,

Hi Tiwari

This is a complicated process, I tried for a while but I was not successful, the people who have the software knowledge to do this are already professionals who do this job for a fee.

If I find an application one day, I will share it here.

Ömür Tokman

I brought this topic back up because I was curious. Did you solve it? What was the problem? In addition, if you leave a part that I used in assembly open as a sketch and return to assembly, you will encounter a similar situation, but when you switch from part to assembly, it gives an undone drawing ...

Ömür Tokman

I must have seen this thread a bit late.

A few renders I made using Photoview360 at my old workplace about 14 years ago.

Ömür Tokman

Hi Guys,

Model Maria for Beginners.

Maybe it will come up in searches and the forum will be more active, the forum needs to be known a little bit.

25 Years of Model Mania
https://blogs.solidworks.com/tech/2023/ ... mania.html

“He whose two days are equal, is a loser”

Ömür Tokman

would you look into this?
I am adding the macro. I remember it as bulk anted changing.

set language from subtitle options.

Ömür Tokman

tiwari1211@gmail.com wrote: ↑Thu Sep 05, 2024 8:15 am Hi Omur,
trail.jpg

Is this what you're talking about?

SheetMetal_to_DXF - R4.swp: (307 KiB) Downloaded 92 times

Ömür Tokman

OUT_NAME_TEMPLATE = "Temp\DXF\" & PROJECT_NAME & "\" & firstFiveChars & "\DXFs\<$PRP:Engraving>_<$PRP:MOC>_<$PRP:Thickness>mm_Qty-<$PRP:Required>x.dxf" What do you want to do? Can you explain what you want to do with this code? You create a DXF folder i...

Ömür Tokman

Hi Ömür, 2 and 3 will be selected, if you don't want the form I will leave it to you to remove it. 2024-08-27_11-02-12.png 2024-08-27_10-54-29.png It will create a folder on the desktop with the first 5 characters in your project and save the files there. 2024-08-27_10-52-55.png 2024-08-27_10-54-52...

Ömür Tokman

The Macro "Omur DXF Export.swp" works perfectly. Is there any way to also save .Step files together while saving DXF's ? Remember that I am an amateur, you should try it before real use. macro can extract step files to dxf or step folder. But it is related to codes. you can move this feat...

Ömür Tokman

@Ömür Tokman - Thanks a lot for such awesome code. Is it also possible to insert text inside part in DXF from custom property ? In my case i have Part engraving number in custom property which I have to manually insert as Text (yellow layer) in DXF everytime. Which later on laser marked on Part as ...

Ömür Tokman

Likely nothing ... This feels like a glitch. Most glitches that present as something displaying wrong or not displaying at all usually have something to do with graphics, not features. Can you consistently reproduce the behavior or does it seem randomish? If consistent, can you try opening the file...

Ömür Tokman

Hİ Alex
No,
If you notice, one of the two bends in the same direction has a line and the other one doesn't.

and there are no passive elements.

Ömür Tokman

Hello Friends, Have you ever encountered something like this before? There is not a single bend line. 2024-08-23_15-56-54.png 2024-08-23_16-01-15.png The interesting thing was that all the lines were there except for one. The arch thing seems active. I tried many things, finally it was fixed when I ...

Ömür Tokman

This issue happens every now and then I've experienced this many times, to be honest I couldn't find the reason either, sometimes it was fixed when I deleted the view and re-created it, sometimes I saw that it was fixed when I turned the pc on and off even though I didn't fix it at all. For a long ...

Ömür Tokman

DanPihlaja wrote: ↑Mon Aug 05, 2024 9:18 am Just hit CTRL C on the parent configuration, and then CTRL V on the top level. It copies the parent config and all downstream configs.

image.png

I tried many things but I don't know why I didn't try this.

Yes it is, it works. Thanks Dan.

Ömür Tokman

DanPihlaja wrote: ↑Mon Aug 05, 2024 9:18 am Just hit CTRL C on the parent configuration, and then CTRL V on the top level. It copies the parent config and all downstream configs.

image.png

Thanks Dan,
I will try it tomorrow and get back to you.

Ömür Tokman

Thanks for the reply Matt,
Yes I reached out to John on LinkedIn, but I couldn't reach Tony on Linked, personal email, or company email.
I hope someone reaches out, it's been a long time, I was just wondering.

Ömür Tokman

Hi Guys, Solidworks configurations copy derived configurations together in the same part. I'm looking for an easy way to do this. As you can see in the picture below, I am creating the Metric configurations of a bolt, (manually) I do not want to use Excel (table). For example, when I want to create ...

Ömür Tokman

Hey guys,
Has anyone been in touch with Tony Tieuli and Roasted By John lately? It's been a while, I was wondering how they're doing.

Ömür Tokman

Dennis Bacon wrote: ↑Thu May 23, 2024 2:51 pm Is tapping on the "Tab Key" when you get a reversed preview not an option for you?

I did not know that..
I was quick too so I marked your answer as correct. Thank you very much.

Ömür Tokman

I was thinking there must be a method and finally.

https://help.solidworks.com/2021/englis ... SWassy.htm

https://help.solidworks.com/2021/englis ... _edges.htm

Ömür Tokman

I tried in many ways. Mate ref. And it's one of them. I tried all the keys on the keyboard,,,

The problem is that the same piece is sometimes right and sometimes wrong. If you find a method, I will share it.

Ömür Tokman

Hi Guys,
I've had it in mind for a while now that I wanted to research it today.
I use automatic mate during assembly, but most of the time the mate is reversed. I can't redirect mates completely randomly.
Is there a method for this?

Ömür Tokman

Have you tried surface loft? I would draw the beginning, middle, end, 3 lines and inner and outer path. I'm not at my PC so I can't try it.

Ömür Tokman

Hi Bryan, Just an idea, you need to try it, you can check the hole diameters with solidwork api (macro). I think you can make the hole diameters other than the hole diameters you specify red. Edit: maybe https://r1132100503382-eu1-3dswym.3dexperience.3ds.com/community/swym:prd:R1132100503382:communi...

Ömür Tokman

Hello Gentlemen, An update. This time I'm doing things with a tlb reference file in C#. The first version was putting the cutting lengths in order and getting the result. I wanted to make a VBA that creates self-renewing combinations and actually I did it, but Excel was crashing when the combination...

Ömür Tokman

We bought this monitor because there were no discounts I expected in November. I liked the monitor and it is not a crude monitor as I thought. My eyes quickly got used to it. The only downside is that it has a bright monitor. I didn't pay any attention to this. If I had noticed, I would have definit...

Ömür Tokman

Hello everybody, I couldn't decide why I would write about this topic. I made an Excel macro that I've been thinking about for a long time and wanted to share it here. This macro places part profiles with cutting dimensions into one length profile with minimum wastage. The more parts that need to be...

Ömür Tokman

One day, while a man was walking on the road, his foot hit something. He got curious and picked it up. While he was cleaning the lamp, an angry genie came out of the lamp and said to the man; "I'm very angry today and I'm only giving you one wish, wish what you want and let me go." The man...

Ömür Tokman

Merhaba Omur, Personally, I'd get (2) 32" 4K (or 2K) monitor's... you can find them for ~$250usd each. (~$500 for both total) I share my 16" 4k laptop screen with this 4k LG 32UN500-W Monitor 32" UltraFine (3840 x 2160) Display, AMD FreeSync, DCI-P3 90% Color Gamut, HDR10, Built-in S...

Ömür Tokman

They found a few models I liked expensive, so we agreed on this model.

Ömür Tokman

I would get a 3rd 27" and use all 3. Assuming your video card will support 3 monitors. The truth is that a monitor needs to be purchased for the accounting department, but they do not want a 32" one. I turned this situation against me. :mrgreen: I made an offer to the accounting departmen...

Ömür Tokman

depends on distance and position from your eyes... 32 could be too big and to high forcing your neck to move or stress your eys The monitor will be 110cm away and I will adjust the vertical center of the monitor to eye level. I'm just worried about it looking rough, my only concern is whether it's ...

Ömür Tokman

gupta9665 wrote: ↑Wed Nov 01, 2023 5:25 am I would prefer 2 monitors instead of 1.

There will still be two monitors, but one is 27" and the other is 32"
I can't decide whether I should continue with two 27" ones or whether the 32" one will be too big or unusable.

Ömür Tokman

Hello everybody, I'm currently using two 27" monitors, but I'm thinking of replacing one with a 32" one. Currently, I sit at an average distance of 1 meter and 10 centimeters. I've never worked with a 32" monitor before, I can't imagine if I can get used to it or if it will be too big...

Ömür Tokman

Thank you for sharing, it is a very detailed macro

Ömür Tokman

There is no problem, everything is fine now, thank you again for sharing.

Ömür Tokman

The dimensions do not match the figure in the picture.
I added the 3 dimensions I pointed out as estimates. What actually is the measure?
When the measurements are applied, the tip gives a different result.

Ömür Tokman

Successful! thank you for sharing.
There's only one problem, at least it's me.
It works in all formats but not in "easm" format.
It reports that it is saving, but there is no result (it does not save in easm format.)

Ömür Tokman

Yes, I added that reference without removing it. Good thing you removed the reference and added it, I forgot to add it again.
Thanks Alex

Ömür Tokman

Maybe it'll be useful.

https://www.codestack.net/solidworks-ap ... s-to-part/

By the way, welcome to the forum.

Ömür Tokman

Might be worth exploring but since the "new" file would have a different name (New date & [possibly but not necessarily with internal revisions] new revision number) ....... Maybe you'd like to try it. You can call these codes as a function before saving. Or you can return a value and...

Ömür Tokman

Not a solution but just an idea. The save as command queries the existing same name and opens a window to save it to a different location if it exists.
Maybe.

Ömür Tokman

Frank_Oostendorp wrote: ↑Tue Oct 03, 2023 7:08 am Yes, runs smoothly now.
image.png

Thank you very much for the feedback. It's nice to be useful to someone, the qr code link is nice.

Ömür Tokman

Frank_Oostendorp wrote: ↑Tue Oct 03, 2023 5:52 am (Thanks, sorry but it throws another error. Let's see if Alex can test it.)
After clearing the select box of the missing reference, runs great. Good job.

image.png

Sorry, I didn't quite understand, is it working smoothly now?

Ömür Tokman

Would like to test it, but seems missing the QRGen file. image.png image.png You don't need to add any references. That reference is from a different attempt. I added a module to create a qr code, but if you need to add it too, I'm adding it here. image.png 2023-10-03_12-08-12.png 2023-10-03_12-09-...

Ömür Tokman

AlexLachance wrote: ↑Mon Oct 02, 2023 2:41 pm Awesome work Omur! I might give it a try and see if we could replace our bar codes with these.

I'm looking forward to your return, my mate.

Ömür Tokman

gupta9665 wrote: ↑Mon Oct 02, 2023 1:55 pm Thank you for sharing

Actually i thank you. This is such a small thing compared to what you have done for us. Mr. Gupta I learned a lot from you.

Search found 361 matches