CAD Forum

ctsturdiv

"CAD Operator" "Detailer" "BIM" is very specific: "Building Information Modeling" My feed from indeed: "CAD Drafter" "Solidworks Drafter" "Product Designer" "Mechanical Designer" "Mechanical CAD Designer" &quo...

ctsturdiv

There are different "nurse" in different departments with different qualification. Same with "driver". Same with "doctor". You're starting in a new industry and you already know how it works () Well, sometimes you have to ask the dumb questions. And, like most forum bo...

ctsturdiv

Yep, it’s def frustrating when the drug testing feels more invasive than necessary, especially when you’ve been responsible and have your priorities straight. I’ve been in a similar spot before. I had to use synthetic urine for a job test once, and I found some helpful tips on ccwrc.org that made t...

ctsturdiv

Agency get pay from you or employer. Just look through local job sites (indeed, linkedin, government job site etc) online and company websites (go through Google Map in you area). Don't be too specific with the search. You'll find the keywords and narrow down later. Yeah, that is really the annoyin...

ctsturdiv

Not sure what your question is. "People like this" means what? Do you mean recruiters? I don't think there's one central agency you go to for drafters. There are a million agencies. And once you find out who they are, they won't let you forget. A lot of them are from India. You'll find th...

ctsturdiv

As last semester is underway, I am looking towards my job hunt. In other industries I have worked in be it convention banquets/bartending, nursing assistant work, even plants or warehouse work, you had these staffing agencies. You went in, took whatever test, showed any paperwork, and if they had so...

ctsturdiv

New trailer model we developped, made to carry chickens to the slaughterhouse. The roof is operated by hydraulics, it lifts to give clearance when loading/unloading. Resized_20240829_145351.jpeg Resized_20240829_152849.jpeg Looks like a cool solution to getting people in there. Funny enough, I did ...

ctsturdiv

There are different variants, in this case it is a chassis that slides on nylon and is "dragged" by the truck. So he reverses with breaks locked to have the chassis slide front so that the trailer can dump, and puts it in drive with breaks locked to have the fifth wheel slide-out and be a...

ctsturdiv

Project me and 2 collegues worked on, I worked on the rear trailer, one guy did the dumping trailer and the other did the development for special stuff such as the side-doors and the tarp system. Since it is a B-Train, the axles of the front trailer require to slide up front so that the trailer can...

ctsturdiv

Back from vacation, just in time for the stock market to crash Thankfully, it seems to be stabilizing. I am no financial expert, but part of me believes it has something to do with all these huge tech companies getting all these profits and doing stock buybacks while laying off significant amounts ...

ctsturdiv

Summer Semester is done. Last Final was Friday. I know most people here are in the field, but I recommend anyone going back NOT to take heavy math classes during the summer. I DID pass, but it was not pretty at all. Fortunately, my presentations and applications were good enough to carry me but I fe...

ctsturdiv

. . . you might want to watch this video of a test we did a couple weeks ago. Please note that this is a Thrie-beam rail, which is made of the same material as a standard W-beam rail, except it has one more rib, so it's about 8" wider. A standard W-beam will redirect a passenger car or a 1/2 t...

ctsturdiv

Imagine. Your brain is mush. From obtuse parabolas, numbers, formulas and lines. It feels like someone is reaching in your mind and rearranging the very way you think. One more semester after summer till the field. With more lines and shapes and formulas. But you push through as others fall to the w...

ctsturdiv

Now, if the people that make GIMP could be hit upside the head with a UI design handbook repeatedly, maybe at least Photoshop could be gotten rid of. I have had to use GIMP occasionally back when I was texturing stuff for DnD maps. I have damn near an Associates degree in CAD at this point and even ...

ctsturdiv

Yes, people will lose job. But they can find something else to do. They can learn to do new stuff. Then if AI and robot can do everything, then people don't need to work and just enjoy life. The problem is just because work ends, rent does not. Also, the jobs that replace them are very low paying j...

ctsturdiv

I am slightly concerned if our industry starts this stuff. Part of me thinks we are somewhat safe-ish since a lot of the graphics design stuff is all templates at entry level. Also, I don't think a big company is going to be okay with something like the mechanical drawing of an engine, floor plan of...

ctsturdiv

I sometimes feel like they try to milk things too much. It's kind of like Ancient Aliens. Yes, it's interesting to a degree. Yes, 80 percent of it is bullcrap but 20 percent of it may have a sliver to it. No, it does need dozens and dozens of episodes. I mean, I am sure if you dig anywhere you will ...

ctsturdiv

I'm thinking of adding on to my garage, and in order to sort things out I modeled my house. (I've been working on bits and pieces as needed, but this is the first time I finished the full exterior.) There is absolutely no excuse for my little 1700 sq-ft house to have 27 roof lines. image.png And I'...

ctsturdiv

Ready for Summer semester here. Taking the English and Algebra I put off to graduate on time. As long as I avoid calamities and catastrophes, should graduate in Fall with an AA in Drafting and Design with Honors. Still decent chance of Dean's List Honors if I do really, really well. Still need to fi...

ctsturdiv

We were looking to add a 2nd seat to be shared by a few interns / jr engineers. Including $4k for the network license manager, the cost was $15k. For a single seat of SW Standard. image.png That's insane. There are people in lower level jobs in low cost of living areas that don't make that much in ...

ctsturdiv

Printer already do that. That's the reason I only use Brother printers. It just works and toner lasts forever. Last one I had lasted 6 years. This one is on it's second. Had to buy it because DRFT 1001 needed a lot of stuff printed out where he would simulate sketches coming from an engineer I had ...

ctsturdiv

Looks like we'll be ending our SolidWorks subscription this year after 10 years of subscription. Hoping it puts some pressure on them and that others will have the same reflex. The prices are ridiculous and so are the justifications for the increases. Here's the nice mail they sent me this afternoo...

ctsturdiv

It appears from going on these internship hunts, a lot of people are using either Microstation or Open Roads in the area. Now don't get me wrong. A lot of people still use AutoCAD civil and AutoCAD itself. But you work Microstation, you can get okay work as all the state maps are done in it. Problem...

ctsturdiv

Daughter was cranking out this song after the last 3rd semester final. I plan on not even LOOKING at AutoCAD for at least 2 weeks. Then this summer, I will begin looking at portfolios, straightening up linked in, knocking out 2 classes. Then Disciplines II, BIM and graduate in December! I am over th...

ctsturdiv

Evil is around us all the time. Burning or hiding it won't make it go away. Knowledge is power. "The righteous need not cower before the drumbeat of human progress. Though the song of yesterday fades into the challenge of tomorrow, God still watches and judges us. Evil lurks in the datalinks a...

ctsturdiv

I feel bad, now. I have not picked up an actual non school or work related book in years. Mostly due to lack of free time especially with all this workload. I think the last books I read was I went off on a Robert Green kick for minute. I read both The 48 Laws of Power and The Art of Seduction A lot...

ctsturdiv

https://scontent-lga3-2.xx.fbcdn.net/v/t1.15752-9/434593448_2787049824805179_508622762699224154_n.jpg?_nc_cat=109&ccb=1-7&_nc_sid=5f2048&_nc_ohc=00Q06j3-FugAb5D_QVJ&_nc_ht=scontent-lga3-2.xx&oh=03_AdU9tBKUyDPAbcI0Hd5vyW8XqJgeocoRfEt4EruPUtKzcw&oe=663BAE64 This is what it loo...

ctsturdiv

Well, interview was on the 4th. Seems I was mistaken in my initial research and they do a lot of Civil. They also wanted me in person, not on MS Teams. Got in there early, and they were taken aback by my age for a minute. They expected someone in their 20s because I put no call center stuff on my re...

ctsturdiv

Have an interview over MS Teams for a local architect firm with the vice president of the firm. She had gotten a resume from my instructor. Though I am not holding my breath. In previous industries, I have been ghosted and things not work out. Not sure how they do drafters. Or if they see a 50 year ...

ctsturdiv

I've been on W11 for a while, and never noticed that. Thanks for pointing that out, that is a huge timesaver. I was forced to upgrade to W11 last spring. Pain in the @$$ and freaked me out. Also inconvenienced me since the wiring in my neighborhood is not the best (the wires here are cut and recut ...

ctsturdiv

Good morning everyone and a happy new year to all of you! I hope you all had a great christmas time! Back to work this morning for me, those 2 weeks off were a blessing, now back to the big things! Went WAY too fast. Yes, back to the big things indeed! Going into 3rd semester. A few classes for Sum...

ctsturdiv

Was browsing around the Solidworks Certification Tester website... Apparently they cant even keep the font consistent (Or did they intentionally make the font smaller, hoping that people could not see it? :)) image.png Interesting you are going that route. I have heard rumblings in various places a...

ctsturdiv

SPerman Some of that stuff is still somewhat useful. For the Principles of Drafting class during spring, we had to do some old school stuff. I also used ruler, compass, and protractor to measure stuff for my final project in there. My instructor was telling me sometime around the 90s, people starte...

ctsturdiv

Thinking back I cannot say that I can find a correlation between the demeanor/cordialness of a professor and their ability to teach. I have learned a lot from a couple that were just jerks, I've been in classes with the friendly, buddy type professor and those credits were a waste of time and money...

ctsturdiv

Pipe is used everywhere. Every building has miles of pipes. Pipes under and around the building. HVAC is another "pipe". As much as I would be happy never to see a nozzle or slip on flange again after being traumatized last semester, I may very well select piping as one of them. Thinking ...

ctsturdiv

Rough semester. Anyone who say "trade school is for flunkies" if I was not a pacifist, I would be tempted to slap. The courses this semester were HARD. BUT.. I ended up passing. C in speech only because I accidentally missed an assignment because of having to leave town for a sick elder an...

ctsturdiv

Wanted to say, I figured out my solution. It was a font size issue then Tcircle. I feel like an idiot. What I did for my final drawings is make all the symbols before annotating and just copy/move as needed to show nozzels. Also solved an unrelated problem with text not lining up in blocks for thing...

ctsturdiv

Building up the motivation to draw this complicated vessel and type out the P+ID final. They gave us weeks to do them on purpose. Complicated as hell with lots of ticky details. Don't want a repeat of last project when I turned in rushed work. But... procrastination is hard not to do. Probably start...

ctsturdiv

I personally dislike all the spyware and such they put in smart TVs lately. I will take a monitor any day, though it's a bit more. I have a fairly large UHD monitor that I use for my school work. For a second, I tried an older 1080p flat screen I somehow acquired somewhere, but it looked like crap u...

ctsturdiv

Are you working in Modelsapce or Paperspace? You have to be in paperspace to measure differently. If the file is export from SW or other CAD, it depends on export setting. All exports to modelspace. So if there are views with different scale, they will not be 1:1. This is in paper space. We export ...

ctsturdiv

Probably on 3.5 floppy. If not 5.25. Might have some on backup tapes. have not seen a 5.25 since the Commodore 64. Still mad because an ancient ex-girlfriend's pet cat (that I ended up with when she left) clawed disk 6 or 7 of Pool of Radiance. That disk had the eastern side of the overworld around...

ctsturdiv

Modelspace is always 1:1. If it's done any other way, fire that AutoCAD user. Paperspace is a "View", same as Solidworks and Inventor drawing. Just in the same file. Understood. I think I conveyed the wrong terminology. One of my biggest headaches that get me irritated is this: Sometimes ...

ctsturdiv

My guess is that you are talking about a specific CAD program (Autocad maybe?). Nevermind. I finally read the last sentence. LOL. SO, autocad it is. Because Solidworks has a lot of these built in. It is AutoCAD. I also checked on r/cad and was admonished for "trying to get out of the basics of...

ctsturdiv

Anyone have a link somewhere for circled letter and number libraries? I feel people on being hardcore, not lazy, and making your own blocks, but why reinvent the wheel when someone, somewhere probably has this? I am familiar with Tcircle command, but I would like quicker way to put this into paper s...

ctsturdiv

I know it's probably "weird", but I have been really getting into some retro synthwave.

Really good for annotationland.

ctsturdiv

Freedom comes with fences. You are free as long as you are within the boundaries of the fence. Without the fences anarchy ensues. Go outside the fence....you lose your freedom. For every good thing that we have, there is a fence to protect it. This includes our freedom. Yes, but what if the fence i...

ctsturdiv

The ________ laws in the US are crazy. Federal law says it is illegal everywhere. Several states say it is OK, but that doesn't mean the federal restriction disappears. In parts of the deep south, just mentioning drug use will get you black balled. The last place I worked tested pre-employment. The...

ctsturdiv

AlexLachance wrote: ↑Thu Nov 02, 2023 11:05 am "No more available"

image.png

Looks like someone offshored...

ctsturdiv

That might be the case Canada. I guarantee the US is different about it. If it is any consequence, I found out my state (Louisiana) just passed a law a while back that said that a positive for pot can not disqualify you if you have a valid medical card at least for state employment. I have also hea...

ctsturdiv

Federal gov't jobs require testing because weed is still illegal by fed law. State laws vary. That's the issue I've had to deal with. For some employers its not a disqualification, just a flag to look for other possible issues. Alcohol isn't illegal but you can get fired for doing stupid stuff afte...

Search found 78 matches