I haven’t seen this specific issue myself, but maybe try clearing your browser cache or using a different browser to see if that helps. Also, check if there are any updates or patches for PR1 that might address this. If the problem persists, reaching out to support might be a good move.

You could set up a simple macro that checks the last number used in the format and adds 1 to it. For example, it could search for the highest number in your project (like XYZ-000-002), then prompt you for the prefix (XYZ-000-) and auto-generate the next number (XYZ-000-003). If you're using Excel or...

It looks like the flange fills feature might be causing issues when trying to flatten the part. One thing you could try is to adjust the geometry of the flange fills, maybe by breaking them into smaller sections or simplifying the design. Another option might be to check if any faces are over-define...

If you don't know how to be ITAR compliant, then this article should be helpful: https://www.linkedin.com/pulse/top-itar ... ith-r1g9e/

Haven’t had a chance to dive in yet, but fixing 23 SPRs sounds promising.

For the hatch color issue, it sounds like it could be a problem with how the color settings are set in SolidWorks or how it’s handling the layers. Sometimes, even if you select one color, there can be overrides in place that are causing it to display differently. Double-check if there’s a color over...

I ran into this same issue a while back! It looks like there isn't a direct setting to change the default precision for Hole Wizard callouts.