recommendation for inexpensive metalworking lathe
recommendation for inexpensive metalworking lathe
Our R&D shop needs a lathe. the budget is under $2,000. Of course it will be small and import at that price. Any suggestions for something reliable?
_________________________________________________________________________
"To succeed, planning alone is insufficient. One must improvise as well."
Salvor Hardin in Isaac Asimov's Novel, "Foundation"
"To succeed, planning alone is insufficient. One must improvise as well."
Salvor Hardin in Isaac Asimov's Novel, "Foundation"
Re: recommendation for inexpensive metalworking lathe
I did a little bit of research in that area a few months ago. I didn't buy anything, because what I found in that price range wasn't able to cut much. If you're cutting plastic or brass, no problem. But aluminum required light cuts and don't even ask about steel.
-
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
Re: recommendation for inexpensive metalworking lathe
Mostly plastic.
Maybe a little drilling and tapping Al.
Maybe a little drilling and tapping Al.
_________________________________________________________________________
"To succeed, planning alone is insufficient. One must improvise as well."
Salvor Hardin in Isaac Asimov's Novel, "Foundation"
"To succeed, planning alone is insufficient. One must improvise as well."
Salvor Hardin in Isaac Asimov's Novel, "Foundation"
Re: recommendation for inexpensive metalworking lathe
See if this has any value. (I didn't watch the video, but this guy does incredible work.)
-
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
Re: recommendation for inexpensive metalworking lathe
Good video
He seems happy with the Sherline and that would do what I need at a great cost.
He seems happy with the Sherline and that would do what I need at a great cost.
_________________________________________________________________________
"To succeed, planning alone is insufficient. One must improvise as well."
Salvor Hardin in Isaac Asimov's Novel, "Foundation"
"To succeed, planning alone is insufficient. One must improvise as well."
Salvor Hardin in Isaac Asimov's Novel, "Foundation"
-
RichGergely
- Posts: 197
- Joined: Wed Apr 14, 2021 11:18 pm
- x 111
- x 160
Re: recommendation for inexpensive metalworking lathe
One question is have you looked at secondhand. A dealer might have something smallish and decent quality that they will give warranty on and it will probably be worth as much as you buy it for now if you sell it later.
Re: recommendation for inexpensive metalworking lathe
There is always the mini-lathe...
This Old's got a few videos on this, upgrades some key parts, lots of bad jokes.
He's a blast if you haven't seen his stuff.
This Old's got a few videos on this, upgrades some key parts, lots of bad jokes.
He's a blast if you haven't seen his stuff.
Re: recommendation for inexpensive metalworking lathe
If it is a mini-lathe you are looking for, Joe Pie has you covered. (No camera tricks here. 1/12th scale functional lathe.)
- Attachments
-
-
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams