Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Jun 13, 2022 9:32 am
by dave.laban
Undoubtedly Dilbert has had this on several occasions. Probably an XKCD or two, too!
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Jun 13, 2022 9:41 am
by berg_lauritz
dave.laban wrote: ↑Mon Jun 13, 2022 3:29 am
So they're closing the Swym Enhancement Requests community to new ideas. I think the problem was determined to be "people are making too many enhancement requests" and the solution was "stop them making requests" not "fix the underlying structural, software and philosophical issues undermining the success of the platform".
And with almost no time to notice:
I mean... I was hopeful after they implemented the compact view. But basically nothing has happened since & the forum is dying a slow death over there it seems. Without i.e. @dave.laban and a handful of others there would be nobody there to answer questions.
This forces everyone to use their VAR instead now and that's extremely slow and VERY cumbersome. I tried using it and often times I got a link to an SPR. After sending them files, Rx captures etc.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Jun 13, 2022 9:58 am
by bnemec
berg_lauritz wrote: ↑Mon Jun 13, 2022 9:41 am
And with almost no time to notice:
2022-06-13 08_34_03-3DSwym Community Changes Coming - June 17, 2022.png
I mean... I was hopeful after they implemented the compact view. But basically nothing has happened since & the forum is dying a slow death over there it seems. Without i.e. @dave.laban and a handful of others there would be nobody there to answer questions. This forces everyone to use their VAR instead now and that's extremely slow and VERY cumbersome. I tried using it and often times I got a link to an SPR. After sending them files, Rx captures etc.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Jun 13, 2022 12:08 pm
by bnemec
dave.laban wrote: ↑Mon Jun 13, 2022 3:29 am
So they're closing the Swym Enhancement Requests community to new ideas. I think the problem was determined to be "people are making too many enhancement requests" and the solution was "stop them making requests" not "fix the underlying structural, software and philosophical issues undermining the success of the platform".
I was able to find the post, then open it to see some of the replies, then click to see more replies of the replies. Somewhat entertaining although there was the foul smell of good suggestions decaying in the SWYMp.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Jun 13, 2022 2:47 pm
by jcapriotti
bnemec wrote: ↑Mon Jun 13, 2022 12:08 pm
Somewhat entertaining although there was the foul smell of good suggestions decaying in the SWYMp.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Jun 13, 2022 3:43 pm
by SPerman
Re: Does anyone actually use 3DExperience? Still waiting.......
Thanks for this Jason.
As always, great read Kevin!
The competition has to be strategizing in some form or maybe they enjoy watching DS destroy themselves.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Aug 01, 2022 1:03 pm
by matt
zxys001 wrote: ↑Mon Aug 01, 2022 10:59 am
Thanks for this Jason.
As always, great read Kevin!
The competition has to be strategizing in some form or maybe they enjoy watching DS destroy themselves.
Maybe this is sounding like a broken record, but Solid Edge reads SW native and can reconnect translated drawings to translated models.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Aug 01, 2022 2:16 pm
by zxys001
matt wrote: ↑Mon Aug 01, 2022 1:03 pm
Maybe this is sounding like a broken record, but Solid Edge reads SW native and can reconnect translated drawings to translated models.
Yeah, hear ya, and with a current gig, SE actually is making more sense.
TL;DR......DSS is killing the current forum and moving it to a Facebook-type app that is locked behind a Google-proof wall, therefore will not be visible to search engines. The current content will "supposedly" be transferred, but no one is holding their breath.
Yeah, it's super dumb. That's the reason for the phenomenal acceleration of this site (it was born a week ago).
I was super disappointed to see they blocked the Google search content. Googling SolidWorks questions usually results in a link to the (old) forum.
Perhaps this forum could get to be shown on the first page of the Google search results somehow and users would be able to browse the solutions from that link without logging in.
Re: Does anyone actually use 3DExperience? Still waiting.......
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Fri Sep 02, 2022 8:20 am
by mattpeneguy
For those not wanting to bother going over there (emphasis added):
More gold from @josh.
Re: Does anyone actually use 3DExperience?
Posted: Fri Sep 02, 2022 10:28 am
by matt
Cbecks Design wrote: ↑Mon Aug 08, 2022 4:47 pm
Perhaps this forum could get to be shown on the first page of the Google search results somehow and users would be able to browse the solutions from that link without logging in.
That's the goal, but only users and content can get us there. You should be able to read without logging in. Google should be able to give you search results without logging in.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Fri Sep 02, 2022 2:14 pm
by AlexLachance
I just got a nice mail from my VAR telling me that he was able to get me a 1 month trial of the 3DXPerience Platform using 3DCreator and 3DSculptor. Not really sure yet what those are, but when I'll have some free time I'll definetly have a little talk with my VAR to get to know what they are exactly in relation to SolidWorks and then activate the trial and have a go at it on my spare time.
Glad he was able to get me the trial, I've actually been asking around a bit for this, even the people on the actual platform weren't able to get me an actual trial.
What I'm getting from that is that Dassault is trying to adress the elephant in the room that is "What will happen to VAR's once we move to 3DX, what money will we save if they are to be removed from the picture?"
Let's not be too optimistic though.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Fri Sep 02, 2022 3:00 pm
by RichGergely
Alex I don't think we will all be moving over to 3Dexperience any time soon or more over forced to. I would go as far to say Standalone solidworks will be here for at least a decade to come. There are too many seats and too many customers who can't see a reason to move to it.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Fri Sep 02, 2022 4:03 pm
by AlexLachance
RichGergely wrote: ↑Fri Sep 02, 2022 3:00 pm
Alex I don't think we will all be moving over to 3Dexperience any time soon or more over forced to. I would go as far to say Standalone solidworks will be here for at least a decade to come. There are too many seats and too many customers who can't see a reason to move to it.
I hope so as well, but I have my doubts with the way they've been doing things the last few years, so I'd rather investigate into it right now then end up with the surprise later down the road. Plus, I'm kind of happy for my VAR too because he seemed pretty bummed out about the platform too
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Sep 05, 2022 2:32 am
by Frank_Oostendorp
""What will happen to VAR's once we move to 3DX" could be the reason for one of my old VAR's to create the Gold, Silver and Bronze levels of support.
Re: Does anyone actually use 3DExperience?
Posted: Mon Sep 05, 2022 9:57 am
by Jaylin Hochstetler
matt wrote: ↑Fri Sep 02, 2022 10:28 am
That's the goal, but only users and content can get us there. You should be able to read without logging in. Google should be able to give you search results without logging in.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Sun Sep 25, 2022 6:23 pm
by KQuigley
matt wrote: ↑Mon Aug 01, 2022 1:03 pm
Maybe this is sounding like a broken record, but Solid Edge reads SW native and can reconnect translated drawings to translated models.
How well does it actually do this though? Can it handle a 20 sheet Solidworks drawing, referencing assemblies and parts, with many configurations? The issue with drawings is that if it is not exactly the same, it takes considerable time to correct. Multiply that by thousands of drawings and you have a very unhappy workforce asking “why did we change?”
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Sep 26, 2022 10:28 am
by matt
KQuigley wrote: ↑Sun Sep 25, 2022 6:23 pm
How well does it actually do this though? Can it handle a 20 sheet Solidworks drawing, referencing assemblies and parts, with many configurations? The issue with drawings is that if it is not exactly the same, it takes considerable time to correct. Multiply that by thousands of drawings and you have a very unhappy workforce asking “why did we change?”
Solid edge and Solidworks don't do assemblies in the same ways. I haven't made any 20 sheet drawings in a while, so I don't have any to test, but it does simple drawings, and multisheet is not a huge complication, so I assume it does that. The things I tested worked. It wouldn't be a bad thing to test this yourself.
It translates features, but not all features, and it translates them as synchronous features, not as history based features.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Sep 26, 2022 2:28 pm
by berg_lauritz
matt wrote: ↑Mon Sep 26, 2022 10:28 am
Solid edge and Solidworks don't do assemblies in the same ways. I haven't made any 20 sheet drawings in a while, so I don't have any to test, but it does simple drawings, and multisheet is not a huge complication, so I assume it does that. The things I tested worked. It wouldn't be a bad thing to test this yourself.
It translates features, but not all features, and it translates them as synchronous features, not as history based features.
Honestly... This sounds like really amazing stuff.
Even if it is not history based it is as good as it gets, I think.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Sep 26, 2022 2:34 pm
by SPerman
matt wrote: ↑Mon Sep 26, 2022 10:28 am
Solid edge and Solidworks don't do assemblies in the same ways.
Can you please elaborate on that statement?
Re: Does anyone actually use 3DExperience? Still waiting.......
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 7:31 am
by SPerman
In the early years of the internet, I had several sites refuse to allow me to register due to the email address provided by Time Warner. First initial last name turns Scott Perman into SPerman, which included a word they considered naughty.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 10:28 am
by AlexLachance
SPerman wrote: ↑Thu Oct 06, 2022 7:31 am
In the early years of the internet, I had several sites refuse to allow me to register due to the email address provided by Time Warner. First initial last name turns Scott Perman into SPerman, which included a word they considered naughty.
Lol, that must have gotten you a sweet nick name
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 10:38 am
by SPerman
I decided to own it.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 10:53 am
by jcapriotti
SPerman wrote: ↑Thu Oct 06, 2022 10:38 am
I decided to own it.
image.png
Oh what other motorists must think. I think this posts belongs under the Joke of Day thread as I nearly sprayed my monitors with coffee.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 11:41 am
by jcapriotti
SPerman wrote: ↑Thu Oct 06, 2022 10:38 am
I decided to own it.
image.png
Scott, you know what's worse......I never saw this before.....now I can't unsee it.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 12:03 pm
by SPerman
If I ever had a male child, and a wife with a sense of humor, I would name him Steven Ulysses. I'll wait while you do the math.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 12:20 pm
by zxys001
SPerman wrote: ↑Thu Oct 06, 2022 12:03 pm
If I ever had a male child, and a wife with a sense of humor, I would name him Steven Ulysses. I'll wait while you do the math.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 1:04 pm
by jcapriotti
SPerman wrote: ↑Thu Oct 06, 2022 12:03 pm
If I ever had a male child, and a wife with a sense of humor, I would name him Steven Ulysses. I'll wait while you do the math.
I take it your middle name initial is not a "U" or you'd already done that?
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 2:04 pm
by SPerman
David Scott.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Thu Oct 06, 2022 3:54 pm
by matt
SPerman wrote: ↑Mon Sep 26, 2022 2:34 pm
Can you please elaborate on that statement?
Mmm. You know I think I was talking about configurations and some of the more advanced inter-part relationships you can create in assemblies. Just to say that you can't expect a translation to be totally 1-to-1 when the functions aren't really equivalent.
Here are some videos that might explain some differences:
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Tue Oct 11, 2022 4:30 pm
by matt
Here's an article that was published 5 years ago. I don't think the big questions it raises have been answered yet. It's as if someone wrote the article yesterday. DS has a vision, but it's a vision that applies to a small segment of the CAD customer base, yet it's being foisted on all of us, and we are being funneled down into this plan " whether or not they realize that today", as the article says.
Do you remember the 1990s? No of course you don't. Most of you were born in the 90s. Anyway, in the 90s, they promised us a lot of things:
- paper drawings would become extinct in 10 years
- there was the persistent VRML (virtual reality markup language) that failed a couple of times and is only gaining traction 30 years later
- by engineers for engineers became by accountants down engineers throats
- CAD on every engineer's desktop has come and gone right back where it came from - CAD and all your data on a centralized server
Somebody got distracted and changed directions. You know the saying about "never meet your hero", right? Well, the new one is never achieve your goal, keep it just out of reach. Goals are not about achieving something, they're about just keeping you moving with that carrot-stick thing. You never get there, just keep turning that tread mill. And for what.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Wed Oct 12, 2022 3:24 am
by dave.laban
matt wrote: ↑Tue Oct 11, 2022 4:30 pm
DS has a vision, but it's a vision that applies to a small segment of the CAD customer base, yet it's being foisted on all of us, and we are being funneled down into this plan " whether or not they realize that today", as the article says.
Reminds me a bit of Microsoft with Windows 8, seemingly planning for a vision of the future where we were all on touchscreen devices, neglecting the fact that a huge percentage of the install base would not be on such a computer. Catering for the niche led to all sorts of terrible feedback and things were pared back to a much more usable Win10.
Unfortunately I don't see a sensible climbdown path for DS. Call me old fashioned but if they made 3DE a better product and they'd probably have more takeup.
Re: Does anyone actually use 3DExperience? Still waiting.......
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Oct 24, 2022 9:02 am
by dave.laban
The fact that the first post is "edited" makes me think it was one of the spam posts where they copy and paste something from somewhere vaguely related to the title, then chuck a URL in at the end that takes you somewhere unsavoury.
3DSwym being 3DSwym though, the moderators don't delete the post and block the user, they just edit the post to remove the offending URL...
Re: Does anyone actually use 3DExperience? Still waiting.......
lol, that guy is a bot. It uses vague generalizations to make claims without providing any actual content or proof.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Oct 24, 2022 9:39 am
by bnemec
AlexLachance wrote: ↑Mon Oct 24, 2022 9:03 am
lol, that guy is a bot. It uses vague generalizations to make claims without providing any actual content or proof.
Or a real human being in Sales & Marketing.
Re: Does anyone actually use 3DExperience? Still waiting.......
Posted: Mon Oct 24, 2022 9:51 am
by DennisD
AlexLachance wrote: ↑Mon Oct 24, 2022 9:03 am
lol, that guy is a bot. It uses vague generalizations to make claims without providing any actual content or proof.
bnemec wrote: ↑Mon Oct 24, 2022 9:39 am
Or a real human being in Sales & Marketing.
So, a human bot.
SWX Sales/Marketing break room has a purple Kool-Aid fountain. All must drink from it.
Re: Does anyone actually use 3DExperience? Still waiting.......
Oh what other motorists must think. I think this posts belongs under the Joke of Day thread as I nearly sprayed my monitors with coffee.