Solidworks BSP Threads

Use this space to ask how to do whatever you're trying to use SolidWorks to do.
terry1988
Posts: 1
Joined: Sun Aug 27, 2023 8:23 pm
Answers: 0
x 1

Solidworks BSP Threads

Unread post by terry1988 »

Hi, I am trying to use the thread feature on Solidworks and make a 3/4-inch tapped thread for a brass fitting. But only ever knowing the metric system It sucks. Can someone please let me know what the size to us in the dropdown feature? Currently using 0.7500-16 but that's wrong.
Attachments
Capture.JPG
Capture.JPG (15.1 KiB) Viewed 9840 times
User avatar
gupta9665
Posts: 420
Joined: Thu Mar 11, 2021 10:20 am
Answers: 25
Location: India
x 438
x 459

Re: Solidworks BSP Threads

Unread post by gupta9665 »

Deepak Gupta
SOLIDWORKS Consultant/Blogger
acmall
Posts: 26
Joined: Wed Mar 17, 2021 7:54 am
Answers: 0
x 30

Re: Solidworks BSP Threads

Unread post by acmall »

Pipe threads are a bit different as 3/4" does not refer to the size of the thread but rather the size of the id of one particular grade of pipe. Different pipe grades have different wall thickness but the od remains the same so that the thread is the same. Always confuses the students here the first time they have to cerate a part with a BSP thread.

For BSPP threads with the hole wizard select DIN for Standard and Straight Pipe Tapped hole for Type. G3/4 will be 3/4 in BSP.
User avatar
Frederick_Law
Posts: 1952
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1648
x 1477

Re: Solidworks BSP Threads

Unread post by Frederick_Law »

Frank_Oostendorp
Posts: 223
Joined: Tue Mar 09, 2021 7:25 am
Answers: 3
Location: Netherlands
x 185
x 230

Re: Solidworks BSP Threads

Unread post by Frank_Oostendorp »

Tapped does not equal tapered, so BSP isn't equal to NPT. ;)
User avatar
Frederick_Law
Posts: 1952
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1648
x 1477

Re: Solidworks BSP Threads

Unread post by Frederick_Law »

Last time I got tapped was in a bar.
Not a British one.
I don't mind a British tap.
Maybe Irish is better.
Post Reply